|
 |
 |
Network |
 |
Cleanable Adapter
Front shell for LC connector
|
 |
The front shell enables LC optical connector, which ferrule diameter is different from FC optical connector, to connect the FC optical connector mounted on existing rear shell.
The front shell have the same features as the existing Cleanable Adapter as shown below.
The front shell can be mated/unmated in a single operation with its lock lever.
By unmating the front shell from the rear shell, the ferrule tip of the optical connector that inside the equipment is exposed and the end of the ferrule to be easily cleaned from outside the equipment, which had been tough for the conventional adapters.
Cleanable adapter conforms to FC, SC, DIN, DIA, ST and LC optical connectors with a replacement of front shell.
Click for large picture |
|
FO-MF(M)Series
Ferrule-less, High Density Fiber Optic Connector
|
 |
1. Cutting edge design eliminates the need for high-cost multi-fiber ferrules. 2. Utilizes unique alignment technology enebling individual fiber PC (Physical Contact) 3. Ultra high density 48 port per "core unit" for multimode glass fiber. 4. Provides very consistent optical perfomance across entire 48 fiber. Click for large picture |
|
X-Vector HS
High Speed Midplane for Cross-Connection
|
 |
Designed for cross-connection applications of 3.2 Gbps and beyond.
It has a twin-coaxial, balanced signal line differential pair structure.
The design provides for controlled skew, matched impedance and low cross-talk.
The connector system uses the same right angle plug connector for both vertical and horizontal system cards and is physically compatible with standard CompactPCI connectors.
Click for large picture |
|
FO-MC Series
Small and Submersible Waterproof, Optical/electric Hybrid Connector
|
 |
- Plug, receptacle fully mated condition satisfy IP68 waterproof performance.
- Click sound assures completion of mating procedure.
- Push-pull coupling mechanism ensuring easy insertion and extraction.
- Optical transmission and electric transmission is possible.
- provides very consistent optical performance equal to that of a simplex optical connector
- Color coded plug boot assures quick mating.
Click for large picture |
|
FO-MF(S) Series
Multiport Fiber Optic Connector with MU coupling
|
_S.jpg) |
- High density, 16-port optical interconnect within a MU duplex plug housing.
- Ferrule-less and unique alignment technology enabling individual fiber PC (Physical Contact).
- Shutter for eye-safty, simultaneously enables fiber-protection and dust-proof.
- Very consistent optical performance, equal to a simplex SMF connector.
Click for large picture |
|
DG1 Series
Infiniband 4x and 12x Input/Output Connectors
|
 |
JAE has introduced the DG1 Series of 4x and 12x connectors that are fully compatible with the Infiniband Trade Association (IBTA) specification. The new DG1 Series plugs and receptacles provide reduced cross talk, better matched impedance, reduced jitter and lower EMI over standard IBTA connector offerings.
Click for large picture. |
|
CH90/CH15
High Density Coaxial Backplne
|
 |
Designed for 50-ohm coaxial backplane applications. It has 90 mini coaxial contacts in a 3 row, 2.54 mm grid pitch. The connector design provides a full interconnect system for backplane, daughtercard and rear-side cable connetor. Each rear-side cable connector has 15 coaxial contacts. (6 cable connectors are required per backplane connector)
Click for large picture |
|
|
_B.jpg){kind=link}
