FO-EX Series
Separable Fiber Optic Adapter with LC coupling |
 |
- Easier Cleaning Operation of Inside-plug Endface by Separable Structure.
- Equal Optical Performance and Same Panel Cutout Dimension with Standard LC Adapter.
- Lever Lock on the Front Housing Enables Easy Separating/Attaching Operation by one hand.
- Snap-on Both Housings (front-body and rear-body) to the Chassis.
- RoHS Compliant and Low Pricing by Normal Molding Technique.
Click for large picture
|
|
End-launch SMA Series
20GHz Coaxial connectors compatible with
SMA (IEC60169-15) standards |
 |
|
Part Number: SMAR006D00
1. Compatible to high-frequency band up to 20 GHz, when mounted on board.
2. High frequency characteristic, insertion loss without drop and low reflection.
3. Easy mounting and repair made possible by screw fixing outer conductor of connector to board without soldering.
4. Compatible to all board thickness. (Can be applied by selecting length of screw applicable to board thickness.)
5. Connection configuration for easy soldering of signal contacts.
6. Compatible to high density mounting with maximum breadth 11mm.
7. Applications:
Mobile phones, PHS, wireless communication equipment such as wireless LAN base stations and access points, high frequency device, high frequency module, high frequency amplifier, measuring equipment and devices for high frequency/ high speed transmission characteristic.
Click for large picture
|
|
CN50 Series
Compact coaxial connectors compatible
with IEC60169-10 (Type SMB) standards |
 |
|
Cable side connector compatible with cable category 1.5DW type has been developed.
(Conventional product is compatible to 1.5D-2V type cable.)
Other features
1. Smaller than machining -type SMB connector
2. Low profile type; mating height from PCB is 9.5mm (when using 1.5D-2V cable) and 10.5mm (when using 1.5D-2W cable)
3. Receptacles can be pre-fixed on PCB before soldering process.
4.Crimp termination, solderless, minimizes deviation of high-frequency characteristics between each cable plug.
5. The design concept established by our precise simulation optimizes impedance matching, low reflection, low loss and other characteristics.
6. Low price is achieved by mass production using stamping for contact and forming of dielectric material by molding.
7. Line Up
Developed
| PCB side: |
Straight receptacle type |
| Cable side: |
Angle plug type |
Now under development
| Cable side: |
Straight plug type |
8. Applicable cable (Developed)
1.5D-2V type, 1.5D-2Wtype
Also other cable types are gradually being developed.
Click for large picture
|
|
DC1 Series
Next-generation Digital Interface Connectro conforming fo HDMI |
 |
|
Development of "DC1 Series" Next-generation Digital InterfaceConnectorconforming to HDMI Standard
Along with the recent progress in digitalized and high-definition televisionbroadcasting,themarket for digital consumer devices such as LCD TVs, PDP TVs and DVDplayersis rapidly expanding.
In response to this trend, JAE has developed "DC1 Series" connectorsfornext-generation digital interface. Early on this product wasproposed to the HDMI office for standardization and has been approved as a small connector conforming to HDMI specifications.
*HDMI (High-Definition Multimedia Interface) is a trademark of HDMI Licensing,LLC.
 Features
(1) Small connector with 1.0mm pitch
(2) High-level impedance-matching design compliant to high-speed transmission
(3) Ground condition structure for EMI prevention
(4) Friction lock structure for easy connector insertion and removal
(5) Surface mount type and through-hole mount type receptacle connectorsareavailable
Applicable markets
Digital TVs, LCD projectors, set-top boxes, DVD players, etc.
General specifications
Poles: 19
Rated current: 0.5A
Withstand volt: AC500V r.m.s.
Insulation resistance: 100MΩ or more
Contact resistance: 30mΩ or less(at start)
Impedance: 100MΩ ± 15%
operationg temperature range: -20Cel to +85Cel
Click for large picture |
|
Cleanable Adapter
Front shell for LC connector |
 |
The front shell enables LC optical connector, which ferrule diameter is different from FC optical connector, to connect the FC optical connector mounted on existing rear shell.
The front shell have the same features as the existing Cleanable Adapter as shown below.
The front shell can be mated/unmated in a single operation with its lock lever.
By unmating the front shell from the rear shell, the ferrule tip of the optical connector that inside the equipment is exposed and the end of the ferrule to be easily cleaned from outside the equipment, which had been tough for the conventional adapters.
Cleanable adapter conforms to FC, SC, DIN, DIA, ST and ＬＣ optical connectors with a replacement of front shell.
Click for large picture |
|
DD1 Series
0.5 mm Stroke Type I/O Connector For USB 2.0
|
 |
The new DD1 Series is fully compliant with current USB 2.0
specifications, which enables speeds up to 480 Mbps.
Features and Design Concept are as follows
1) 0.5mm Pitch,A30pins
2) High Speed Transmission : USB 2.0
3)Type of Plug : Cable Type,ACradle Type
4)With Mating Guide : Min1.0mm (Receptacle - Cradle)
5) With Guide Rail
6)Mating Sequence
7)Grounding mechanism
8) Easy Operation for Manufacturer
Click for large picture.
|
DV2 Series
Platinum Connector
|
 |
Our DV2 Platinum Series&cable harness and receptacle have unique design to improve the signal integrity and EMI shielding over standard DVI connector offerings, while maintaining full compatibility with the DVI specification.
The addition of grounding plates on receptacle and plug provides improved impedance. And specially designed cable harness could achieve the reduced attenuation and skew. Furthermore, our DV2 Platinum receptacles are available.DV2 Platinum Series now available.
Click for large picture.
|
|
DX2 Series
mini-B(TM)USB
|
 |
A new series of mini-B USB connectors up only about 1/8th of the space standard USB-B connectors for portable applications such as digital cameras, cell phones and PDAs. The new miniature series is fully compliant with current USB 2.0 specifications, which enables speeds up to 480 Mbps.
The new mini-B design includes five circuits, with one circuit reserved for future use in host identification between devices.
Click for large picture.
|
|
JB5 Series
IP68 Submersible Waterproof Connector
|
 |
Conform to IP68 rating, water & dust proof when mated, and IP68 for
receptacle when unmated.
- Small Size 14.8mm diameter connectors with 2 to 8 contacts.
- Secure push-pull locking mechanism for easy, one-handed mating and un-mating operation.
- Multiple keying options for correct alignment every time.
Color coded for quick mating.
- Click sound assures completion of mating procedure.
- Long life of at least 5,000 mating cycles.
Click for large picture. |
|
| X-Vector HS High Speed Midplane for Cross-Connection
|
|
Designed for cross-connection applications of 3.2 Gbps and beyond.
It has a twin-coaxial, balanced signal line differential pair structure.
The design provides for controlled skew, matched impedance and low cross-talk.
The connector system uses the same right angle plug connector for both vertical and horizontal system cards and is physically compatible with standard CompactPCI connectors.Click for large picture
|
|
SC1 Series
Mini SD Card connectors
|
 |
Our new SC1 connector is designed for Mini-SD card which is regulated by SD Association (SDA).
Features are following;
1) Small(43% size reduction than SG* Connector!!) and Low profile (H=2.35mm)
2) Push-in, Push-out mechanism
3)Top mount type (Bottom mount type is under development)
4)EMI Shielded Mechanism with 4 metal Hold-down
5)Audible Click assures secure card mating
6) Card Detection switch
7)Break Function avoid card fling out
8) Lead free product, Tape and Reel packaging are availableMini-SD card Adaptor is also available for Full Sized SD Card (SG* series) connector.
Click for large picture. |
|
MX25 Series
Coaxial connector accommodate with 5.8GHz
|
|
- This is a 2 position Coaxial connector for Automotive.
- In-line type and board angle type are available.
- Rated frequency is Max 5.8GHz and VSWR is Max 1.5.
- Mechanical lock for Automotive is available and the retainer is adaptable.
- The shape of the central contacts are box-shaped and they are external pressure resistant type.
- A bridge prevents the break of mechanical lock.Click for large picture.
|
|
MX17 Series
Multi positions connector for SRS
|
|
- This connector was designed specifically for automotive airbag application.
- Mechanical mating ensures secure mating.
- Easy to use LIF connector. (Insertion force: Max 70N)
- Slide structure of lock spring enables a change in shape and provides a break resistant feature.
- Audible click ensures completion of a secure mating.
- Max 10 short circuit is able to be installed.Click for large picture.
|
|
MX23 Series
Multi positions and waterprrf LIF type connector |
 |
- LIF connector with rotating lever operation. (Insertion force: Max 70N in 68position type.)
- The rotating lever can mate with only one hand and is easily operated in a limited work space.
- The rotating lever can be temporally held which enables easy contact insertion and mating.
- A Grommet waterproof structure in the wire side realized the miniaturization of size.
- Pin side is developed by Customer’s own specifications.Click for large picture.
|
|
|
>BACK TO FEATURE PRODUCT LIST
|
_S.jpg)
_B.jpg){kind=link}
