Connector for Small Servo Motor of Industrial Equipment
Compact/ Waterproof JN6 Series Has been developed
|
| |
JAE has developed JN6 Series compact waterproof connectors that meet the purpose of miniaturization and efficient production of servomotors.
Compared to the former JN5 series,
which had 6pos. together for power and brake, this product equips 4pos. for power of motor, 2pos. for brake, 7 pos. for encoder.
In pursuit of versatility for servomotors this connector is made low cost and lightweight by an all-plastic body.
(*By downsizing the existing JN05 series, the JN6 series allows direct connection between motors, and manufacturing motors is possible without paying attention to cable length, consequently increasing productivity.)
|
|
:: Features
|
| |
1
|
All plastic |
lightweight, low cost
|
2
|
Compact and low profile |
4 pos.; plug overall length 28mm, plug height 11.4mm
2 pos., 7pos.; plug overall length 21.5mm, plug height 13.0mm |
3
|
Connection method |
4pos. receptacle; board through-hole type
4pos. plug and other 2pos., 7pos.; crimp type
|
4
|
Secure mating |
enables secure mating by screw fixing 4points |
5 |
Waterproof |
IP67 class, Dustproof (IEC60529) |
6
|
Cable pulling out direction |
selectable from two directions (180 degrees) |
|
:: Applicable market
|
| |
Small servomotors used for semiconductor manufacturing equipment, robots, food machines, transport machines, small machine tools, etc.
|
:: Line up
|
| |
| for Power of Servomotors (4pos.) |
Receptacle |
mold-in after mounting board type
|
Plug |
crimp connection 90 degree angle type |
|
for Brake of Servomotors (2pos.) |
Receptacle |
press fit to motor case after crimp connection type
|
Plug |
crimp connection 90 degree angle type |
|
for Encoder of Servo motors (7pos.) |
Receptacle |
press fit to motor case after crimp connection type
|
Plug |
crimp connection 90 degree angle type |
|
:: General specifications |
| |
| |
Items |
Specification and performance |
| for Power (4pos.) |
for Brake(2pos.)/ for Encorder (7pos.) |
| 1 |
Rated current |
7A max. per terminal |
1A max. per terminal |
| 2 |
Withstanding voltage |
1500VAC |
500VAC |
| 3 |
Insulation resistance |
1000megaohoms or more.
(500V energized) |
1000M megaohoms or more.
(500V energized) |
| 4 |
Waterproof |
IP67 (when mated) |
IP67 (when mated) |
| 5 |
Operating temperature |
-40 Cel to +125 Cel |
-40 Cel to +125 Cel |
| 6 |
Connection specification |
Receptacle: Angle through-hole |
Receptacle: crimp (AWG#28 to #22) |
| Plug: crimp (AWG#20 to #18) |
Plug: crimp (AWG#28 to #22) |
| 7 |
Plug applicable cable |
Cable outer dia.: dia.6±0.5 |
Cable outer dia.: dia.5±0.5 |
|
:: Materials / Finishes |
| |
(1) Receptacle
| |
Name of parts |
Materials |
Finishes |
| 1 |
Pin contact |
Copper alloy |
Au plating |
| 2 |
Pin insulator
|
Resin (black) |
- |
| 3 |
Insert nut (4 pos. only)
|
4 pos. only: copper alloy |
Zinc plating (black chromate finish, chromium hexavalent free) |
(2) Plug
| |
Name of parts |
Materials |
Finishes |
| 1 |
Socket contact
|
Copper alloy |
Au plating |
| 2 |
Socket insulator
|
Resin (black) |
- |
| 3 |
Hood
|
Resin (black) |
- |
| 4 |
Grand nut |
Resin (black) |
- |
| 5 |
Gasket |
NBR (black) Heat resistant |
- |
| 6 |
Bushing |
NBR (black) Heat resistant |
- |
| 7 |
Spring |
Stainless steel |
- |
| 8 |
Screw |
Steel |
Zinc plating (black chromate finish, chromium hexavalent free) |
|
|
